1 filling errors produced mainly by the amount of filling, the filling speed, the upper and lower valve to determine the switching speed. Upper and lower valve switching speed and the viscosity of the product, the greater the viscosity, the valve switch more slowly. 2 thick full speed key to adjust the switching valve valve spring pressure. Spring pressure increases, the valve switching speed.

3 Adjust the size of the valve spring pressure should be measured by filling tested and the operator's experience to determine.

Second, the safe use of automatic filling machine-head automatic filling machine for liquid filling machine, liquid items of work, can not be used for other purposes. To ensure safety, note the following:
1 This machine is no power settings, the normal gas source for the 4-6kg.

2 Note materials mouth overflow if the phenomenon, according to the safety stop switch, to ensure the workshop tidy.

3 The machine washable not wash the body with water directly.

4 The electrical path is simple, not any plug.

5 When the top of the cylinder caused by improper operation can not be returned, please press the button to make the replacement.

Third, automatic filling machine equipment maintenance
1 Automatic filling machine The machine body is stainless steel copper shell, do not use sharp, hard scratch the surface weapon.

2 cylinders at the factory plus a good lubrication, do not open or add any oil.

3 in piston filling machine before cleaning, the remaining product should be cleaned and then filled with soft cleaning fluid within the tank. The company recommends using warm water. If you want used soapy water, alcohol or other cleaning fluid.

4 and in the washable at the same time remove the piston on the screws, so the first time in the demolition process affects the other requirements of